Mazda3 (BP): индивидуальная настройка параметров систем автомобиля
Как с помощью центрального дисплея самостоятельно осуществить индивидуальные настройки параметров систем автомобиля Mazda3 (BP)
Индивидуальная настройка параметров систем автомобиля может быть выполнена или изменена самостоятельно владельцем с помощью центрального дисплея. Перечень систем и функций, доступных для индивидуальной настройки, может изменяться в зависимости от страны поставки и варианта исполнения автомобиля.
Настройка осуществляется в последовательности:
1. Включите зажигание (двигатель выключен или работает).
2. Выберите пункт [Settings] (Настройки) на центральном дисплее.
3. Выберите пункт меню основной системы на центральном дисплее.
4. Выберите пункт подсистемы/функции, подлежащий настройке, на центральном дисплее.
5. Выберите название компонента/опции, затем произведите включение/выключение или настройку.
Настройка представлена для англоязычного варианта центрального дисплея.
Active Driving Display
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Active Driving Display] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Active Driving Display |
Enables the display and selected content to be shown. |
Enable / Disable |
Height |
Adjusts the height of the active driving display. |
Height (31 levels) |
Brightness |
Adjusts the brightness of the active driving display. |
Brightness (11 levels) |
Tilt Adjustment |
Adjusts the rotation of the active driving display. |
Tilt (11 levels) |
Navigation Guidance |
Displays navigation route guidance information. |
Enable / Disable |
Intersection Name |
Selects the desired display mode for intersection names. |
Enable / Disable |
Street Name |
Displays street names. |
Enable / Disable |
Lane Guidance |
Displays navigation lane guidance information. |
Enable / Disable |
Traffic Sign Recognition |
Displays stop signs, speed limit signs, and do not enter signs. |
Enable / Disable |
Speed Limit |
Displays a speed limit. |
Enable / Disable |
Restore |
Restores the active driving display to the original factory settings. |
Reset / Cancel |
Center Display
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [In-Vehicle Displays] on the center display.
4.Select [Center Display] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Display Off |
Turns off the display while still providing audio content. |
— |
Day/Night Mode |
Selects the center display brightness mode. |
Automatic / Day / Night |
Brightness |
Adjusts the brightness of the centre display. |
Brightness (11 levels) |
Contrast |
Adjusts the contrast of the center display. |
Contrast (11 levels) |
Show Drive Results at Ignition Off |
Provides energy efficiency results at the end of the drive. |
Enable / Disable |
Home Screen Clock |
Selects the clock style displayed on the Home screen. |
Analogue / Digital |
Ambient Display |
Enables a simplified interface accessible from the Home screen. |
Blank / Clock |
Restore |
Restores the center display to the original factory settings. |
Reset / Cancel |
Instrument Cluster Display
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [In-Vehicle Displays] on the center display.
4.Select [Instrument Cluster Display] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Fuel Efficiency & Range Display |
Configures how the fuel efficiency and driving range is shown. |
Type 1 / Type 2 / Off |
Restore |
Restores the instrument cluster to the original factory settings. |
Reset / Cancel |
Audio Settings
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Sound Settings] on the center display.
4.Select [Audio Settings] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Sound Adjustment Mode |
Selects a basic or advanced sound adjustment mode. |
Basic / Advanced |
Bass |
Adjusts the bass output level. |
Bass range (19 levels) |
Treble |
Adjusts the treble output level. |
Treble range (19 levels) |
Equalizer |
Selects or creates the desired equalizer curve. |
Flat / Pop / Rock / Jazz / R&B / Classical / Custom 1 / Custom 2 / Custom 3 / Customize EQ |
Listening Position |
Selects the desired listening position. |
Driver’s Seat / All Seats |
Fader |
Moves the audio emphasis forward or rearward. |
Front-Rear (19 levels) |
Balance |
Moves the audio emphasis to the left or right. |
Left-Right (19 levels) |
Automatic Level Control*3 |
Automatically adjusts volume level to compensate for vehicle speed. |
Off / 1-7 (8 levels) |
Automatic Source Level Adjustment |
Automatically stabilizes volume levels across sources. |
Enable / Disable |
Bose ® Stereo Mode |
Selects the desired stereo listening experience. |
Standard / Linear |
Bose ® Centerpoint |
Creates a virtual surround sound listening experience. |
Off / 1-3 (4 levels) |
Bose ® AudioPilot |
Automatically adjusts the music to compensate for road noise. |
Off / 1-3 (4 levels) |
Vehicle Notification And Warning Volume
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Sound Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Vehicle Notification and Warning Volume |
Adjusts the alert volume for notifications and warnings. |
Low / Moderate / High |
Driver Assistance System
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [Driver Assistance System] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Mazda Radar Cruise Control |
Enables automatic control of following distance when using cruise control. |
Enable / Disable |
Traffic Sign Speed Limit Sync |
Automatically limits the vehicle’s speed based on posted speed limit signs. |
Automatic / Manual / Off |
Audible Cruise Confirmation |
Enables audible tones when interacting with cruise control. |
Enable / Disable |
Speed Limit Sign Alert |
Selects the desired notification type for posted speed limit sign alerts. |
Visual / Visual + Audible / Off |
Speed Limit Sign Threshold |
Sets threshold for alert notifications when the posted speed limit is exceeded. |
+ 0 km/h (+ 0 mph) / + 5 km/h (+ 3 mph) / + 10 km/h (+ 5 mph) |
Speed Limit Alert |
Selects the desired notification type for speed limit alerts. |
Visual / Visual + Audible / Off |
Speed Limit Alert Threshold |
Selects the desired speed threshold for speed limit alert notifications. |
+ 0 km/h (+ 0 mph) / + 5 km/h (+ 3 mph) / + 10 km/h (+ 5 mph) |
Driver Attention Alert |
Enables driver attention monitoring and provides alerts when fatigue is detected. |
Enable / Disable |
Driver Monitoring |
Enables camera-based Driver Monitoring to detect fatigue and provide alerts. |
Enable / Disable |
Restore |
Restores the driver assistance system settings to the factory de-faults. |
Reset / Cancel |
Safety Alerts
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [Safety Alerts] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Front Cross Traffic Alert |
Enables alerts when a moving object may cross into the vehicle’s forward path. |
Enable / Disable |
Rear Cross Traffic Alert |
Enables alerts when a moving object may cross into the vehicle’s rearward path. |
Enable / Disable |
Lane Departure Warning System |
Enables Lane departure warning system to alert driver of lane departure risks. |
Enable / Disable |
Alert Type |
Sets the desired notification type for lane departure warning system alerts. |
Audible / Steering Wheel Vibration / Audible+Steering Wheel Vibration |
Blind Spot Monitoring |
Selects the desired blind spot monitoring alert notification type. |
Visual / Visual + Audible / Off |
Alert Timing |
Selects the desired alert timing for blind spot monitoring. |
Early / Normal,Late |
Restore |
Restores the safety alert settings to the factory defaults. |
Reset / Cancel |
Active Safety
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [Active Safety] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Distance & Speed Alert |
Enables the vehicle to provide alerts for following distance. |
Enable / Disable |
Lane-keep Assist System |
Enables lane-keep steering assistance to help the vehicle stay with-in the lane. |
Enable / Disable |
Restore |
Restores the Active Safety settings to the factory defaults. |
Reset / Cancel |
Collision Avoidance
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [Collision Avoidance] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Smart Brake Support |
Enables smart brake support to alert and intervene when collisionis imminent. |
Enable / Disable |
Smart Brake Support Alert Timing |
Selects the desired timing for the collision avoidance alert notification. |
Early / Normal / Late |
Smart Brake Support [Rear] |
Enables smart brake support [Rear] to alert & intervene when collision is imminent. |
Enable / Disable |
Restore |
Restores the Collision Avoidance settings to the factory defaults. |
Reset / Cancel |
360°view Monitor
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [View Monitor] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Display Priority View at Start Up |
Enables view monitor to be displayed after vehicle is started. |
Enable / Disable |
Priority View |
Selects the default view to be displayed after vehicle is started. |
Side / Front / Front Wid / Last |
Automatic Front View Display |
Enables front view to be automatically displayed after vehicle is taken out of reverse. |
Enable / Disable |
Dynamic Guidelines |
Enables dynamic path guidelines to be shown on the rear view display. |
Enable / Disable |
Restore |
Restores the view monitor settings to the factory defaults. |
Reset / Cancel |
Parking Sensor
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [Parking Sensor] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Parking Sensor Display Guidance |
Enables parking sensor display guidance to be shown on the view monitor display. |
Enable / Disable |
Rear Parking Sensor Alert Volume |
Sets desired volume level for rear parking sensor alerts. |
Low / Moderate / High / Off |
Front Parking Sensor Alert Volume |
Sets desired volume level for front parking sensor alerts. |
Low / Moderate / High / Off |
Restore |
Restores parking sensor settings to the factory defaults. |
Reset / Cancel |
Speed Alert
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select [Speed Alert] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Speed Alert |
Enables alerts for when the desired speed is exceeded. |
Enable / Disable |
Speed Alert Threshold |
Selects a desired speed that when exceeded will provide an alert notification. |
30-250 km / h {19-155 mph} |
Speed Alert Notification Type |
Selects alert notification type for exceeded speed threshold. |
Visual / Audible / Visual + Audible |
Restore |
Restores the speed alert settings to the factory defaults. |
Reset / Cancel |
Pedal Misuse Alert
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Safety Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Pedal Misuse Alert |
Alerts the driver when the accelerator and brake pedals are depressed simultaneously. |
Enable / Disable |
Clock
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select [Clock] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Manual Time Adjustment |
Manually sets the clock to the desired time. |
Select (+) to advance the hours/minutes, and select (-) to move the hours/minutes back. You can select (am/pm) only when the (24-Hour Clock) item has been disabled. |
GPS Time Synchronization |
Automatically synchronizes the clock using GPS location data. |
Enable / Disable |
24-Hour Clock |
Displays the time on a 24-Hour clock. |
Enable / Disable |
Daylight Saving Time |
Enables or disables Daylight Saving Time. |
Enable / Disable |
Time Zone |
Selects the desired time zone. |
Time Zone |
Driver Settings
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select [Driver Settings] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Driver Identification |
Automatically identifies the driver based on the key. |
Enable / Disable |
Driver Selection |
Manually selects the desired driver. |
Driver |
Edit Driver Name(s) |
Edits the name of the selected driver. |
Driver’s name |
Voice Recognition Settings
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select [Voice Recognition Settings] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Guidance Volume |
Adjusts the volume of the voice guidance responses. |
Volume (63 levels) |
Guidance Length |
Selects the length of voice guidance responses. |
Normal / Brief |
Barge-In |
Allows user to interrupt with desired commands during voice guidance responses. |
Enable / Disable |
Voice Recognition User’s Guide |
Provides example phrases for a variety of voice recognition-compatible functions. |
— |
Gracenote Database Update
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select [Gracenote Database Update] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Update |
Starts the Gracenote Database update process. |
— |
Update History |
Displays the update history of the Gracenote Database. |
— |
Use Gracenote Database Album Art
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Use Gracenote Database Album Art |
Utilizes gracenote database for displayed album art. |
Enable / Disable |
Language
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Language |
Sets the system display language. |
Depends on market |
Temperature
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Temperature |
Selects the desired unit of temperature. |
°F / °C |
Distance / Speed
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Distance/Speed |
Selects the desired unit of distance and speed. |
mi / mph or km / km/h |
Pressure
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Pressure |
Selects the desired unit of air pressure. |
psi / kPa / bar / kgf/cm 2 |
Fuel Efficiency
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Fuel Efficiency |
Selects the desired unit of expression for fuel efficiency. |
L/100km / km/L / km/gallon |
ETC Volume
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
ETC Volume |
Sets the alert volume for ETC notifications. |
Volume (63 levels) |
Restore All Factory Settings
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Restore All Factory Settings |
Resets each type of setting and the user data to the initial condition. Note • The CD ripping data and the data related to the malfunction diagnosis are not initialized. |
Reset / Cancel |
Door Locks
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select [Door Locks] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Automatic Door Locks |
Configures when the automatic door locks operate. |
Lock: While Driving / Lock: While Driving / Unlock: Ignition Off / Lock: In Gear / Lock: In Gear / Unlock: In Park,Lock: While Driving, Unlock: In Park / Off |
Automatic Re-Lock Wait Time |
Sets the time for the doors to re-lock if a door is not opened. |
30 seconds / 60 seconds / 90 seconds |
Keyless Auto-Lock |
Enables the vehicle to automatically lock when the driver walks away. |
Enable / Disable |
Keyless Beep Confirmation Volume |
Adjusts the beep volume when locking / unlocking doors. |
Low / Medium / High / Off |
Keyless Unlock Mode |
Selects which doors unlock with the keyless entry switch. |
Once: All Doors / Once: Driver’s Door / Twice: All Doors |
Restore |
Restores door lock settings to the factory defaults. |
Reset / Cancel |
Exterior Lighting
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select [Exterior Lighting] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Automatic Headlight Sensitivity |
Adjusts the sensitivity of the automatic headlight illumination feature. |
Low / Medium-Low / Medium / Medium-High / High |
Automatic Headlight Timeout |
Sets the length of delay before headlights turn off. |
30 seconds / 60 seconds / 90 seconds / 120 seconds / Off |
Adaptive LED Headlights (ALH) |
Switches between high and low beam automatically. |
Enable / Disable |
High Beam Control System (HBC) |
Switches between high and low beam automatically. |
Enable / Disable |
Adaptive Front-Lighting System (AFS) |
Adjusts lighting output based on driving conditions. |
Enable / Disable |
Daytime Running Lights (DRL) |
Enables the daytime running lights. |
Enable / Disable |
Manual Headlight Leveling |
Adjusts the headlight beam angle. |
Headlight beam angle (11 levels) |
Coming Home Light |
Sets the length of delay before headlights turn off. |
30 seconds / 60 seconds / 90 seconds / 120 seconds / Off |
Leaving Home Light |
Turns headlights on with unlock button press on key. |
Enable / Disable |
Restore |
Restores exterior lighting settings to factory defaults. |
Reset / Cancel |
Interior Lighting
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select [Interior Lighting] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Ambient Lighting |
Sets the intensity of ambient interior lighting. |
Low / Med / High / Off |
Illuminated Entry Duration |
Selects the desired illuminated entry lighting durations. |
7.5 seconds / 15 seconds / 30 seconds / 60 seconds |
Restore |
Restores interior lighting settings to factory defaults. |
Reset / Cancel |
Rain-Sensing Wipers
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Rain-Sensing Wipers |
Enables automatic rain-sensing windshield wipers. |
Enable / Disable |
Automatic Folding Side Mirrors
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Automatic Folding Side Mirrors |
Enables the side mirrors to fold automatically. |
Enable / Disable |
Turn Signals
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select [Turn Signals] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Three Flash Turn Signal |
Enables the turn signal to flash three times then stop. |
Enable / Disable |
Turn Signal Indicator Volume |
Adjusts the volume of the turn signal indicator. |
Low / Medium / High |
Restore |
Restores the turn signal settings to the factory defaults. |
Reset / Cancel |
Rear Window Defogger
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Rear Window Defogger |
Selects the duration of rear window defogger operation. |
Automatic Shut Off / Continuous |
Link Seat & Climate Control Temperatures
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Link Seat & Climate Control Temperatures |
The air conditioning function of seat warmer or heated steering wheel is activated in conjunction with the auto air conditioner. |
Enable / Disable |
Fuel Door Lock Delay
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [Vehicle Settings] on the center display.
4.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Fuel Door Lock Delay |
Sets length of delay until fuel door locks after vehicle is locked. |
0 seconds / 30 seconds / 60 seconds / 90 seconds / 120 seconds |
System Information
1.Switch the ignition ON (engine off or on).
2.Select [Settings] on the center display.
3.Select [System Settings] on the center display.
4.Select [System Information] on the center display.
5.Select an item name, and then select option.
Display of center display |
Function |
Settings |
Legal Notices |
Displays system software licensing information. |
— |
Version Information |
Displays system software version information. |
— |
Помощь, связанную с настройкой или неисправностями и ремонтом систем управления автомобилем, вы можете получить записавшись по телефону: +7(495) 001-05-21, а также задать ваши вопросы в нашем чате: Ниппон Сервис Chat.